To take control of this, you need a . What is Maximum Demand? Maximum Demand is the highest average load (usually measured over 15, 30, or 60-minute intervals) that a system draws during a billing period.
Disclaimer: This guide provides estimation methods. Always consult a licensed electrical engineer for final design and safety compliance.
Grab your last 12 utility bills. Find the highest "Demand" value. Compare it to the sum of your connected load. You will likely find you are paying for capacity you rarely use.
Where is the Demand Factor (or Diversity Factor). Standard Demand Factors (Reference Guide) | Load Type | Typical Demand Factor | Notes | | :--- | :--- | :--- | | Lighting (Office) | 0.75 – 0.90 | Fluorescent/LED | | Lighting (Warehouse) | 0.95 – 1.00 | High bay, always on | | General Power Outlets | 0.10 – 0.50 | Varies heavily by occupancy | | HVAC (Cooling) | 1.00 | Worst-case summer day | | HVAC (Heating) | 0.80 – 1.00 | Electric heat is high demand | | Lifts / Elevators | 0.40 – 0.60 | Largest motor only | | Motors (Continuous) | 1.00 | Pumps, compressors | | Motors (Intermittent) | 0.40 – 0.60 | Conveyors, cranes | | Kitchen Equipment | 0.40 – 0.70 | Not all used at once | The "Pro" Calculator Tool (Manual Method) If you don't have a power analyzer, use this systematic approach to estimate your MD.
In most commercial tariffs, the electricity bill is split into two parts: and Demand Charges (kVA/kW) . The Demand Charge is often the larger shock—it is based on the highest average load recorded during a billing window.
In the world of electrical engineering and facility management, Maximum Demand (MD) is a critical metric. It isn't just about keeping the lights on; it directly impacts your capital expenditure (cable/transformer sizing) and operational expenditure (electricity bills).
